HandBrake (Free)
التحميل بالداخل
http://handbrake.fr/downloads.php
HandBrake is an open-source, GPL-licensed, multiplatform, multithreaded video transcoder, available for MacOS X, Linux and Windows. (Free)
Thx to KnowYourCell
Requirements:
Installed copy of Handbrake software
Video files and or DVD of your choice
HTC EVO 3D with microUSB cable
Step I: Launch the Handbrake application on your computer and select the video source
1 Launch Handbrake (figure 1)
2 In the menu on the right-hand side, select the iPod Legacy preset (figure 1)
3 Select your video source by clicking on the Source dropdown menu (we used a DVD for our testing purposes)
4 Select the destination and name for the file once it has been converted (both the .mp4 and .m4v extension work for the EVO 3D)
5 Confirm that the container is set to MP4 File and that Large file size, Web optimized, and iPod 5G support are unchecked
Step II: Adjust Handbrake’s Video Settings
Picture Tab:
1 Uncheck Keep Aspect Ratio
2 Set the EVO 3D Width and Height (the EVO 3D supports a maximum of 960 x 540 pixels)
1 Set Handbrake’s encoding settings by clicking on the Video tab (figure 2)
2 Confirm the Video Codec is set as H.264 (x264)
3 Framerate (FPS) should be set to Same as source
4 Under Quality, select the Avg Bitrate (kbps) and change it to 1500
Step III: Adjust audio settings
1 Set Handbrake’s audio settings by clicking on the Audio tab (figure 3)
2 Confirm the Audio Codec is AAC (faac)
3 Mixdown should be set to Stereo
4 Change the Samplerate to 48
5 Change the Bitrate to 160
Step IV: Save as a preset for future use
1 Click on the Presets menu and select New Preset
2 Enter EVO 3D in the dialog box and click Add
3 “EVO 3D” will now be saved as a preset and listed on the right hand side in Handbrake to be used in the future
Step V: Convert the video and copy to your EVO 3D
1 Click on the Start button in Handbrake
2 A command line/DOS window will open and start to process the video conversion
3 Once the conversion is done, mount your EVO 3D on to your computer via USB
4 Once mounted, create a folder named Video in the root folder on the EVO 3D
5 Copy converted file into the Video folder
That’s it! The converted video can now be played on your EVO 3D using the Gallery app. It should look fantastic on the EVO 3D’s screen as long as the original source was of good quality.
A few things to keep in mind when converting video:
1 The EVO 3D does not like video file sizes over 2GB (the settings in Step II should help insure that the file size is kept under 2GB)
2 Your converted video will only be as good as the source video
3 If your source is over 960 x 540, you must be sure to set the width and height to a maximum of 960 x 540 as noted in Step II
